• Repair kit for emergency repairs.
• Supplied in hard waterproof container with tamper proof lid.
• Ideal to keep on board.
• Contains 70ml tube of Hypalon adhesive,
• 35 x 15cm of Hypalon material,
• Abrasive paper
• Full repair instructions.

Black, Grey, Light Grey, Orange, Red, White, Yellow

PLEASE NOTE:- When convenient following an emergency repair, a Permanent Repair, can be made using Polymarine 2 part Adhesive.

Available in one-component 70ml tube or two-component 250ml tin supplied with 10ml A3695B curing agent.

PLEASE NOTE :- For a complete bond 2903 solvent must be used before the adhesive is applied.

* Solvent based polyurethane adhesive giving excellent adhesion to both plasticised and unplasticised PVC, nylon fabric, polyurethane fabric and foam

* Use for repair of all PVC inflatables including Zodiac/Bombard “Dynalon” and “Strongon” fabrics and Narwhal/Valiant “Hypertex” (see Boat Fabric Type Table)

* Easy to use as a single part glue for quick and temporary repairs * Contact bonds in 10-15 minutes, full cure 48 hours

* Easy to mix two part supplied in sets with requisite amount of curing agent

* Can be used as a single part for quick temporary repairs

* Easy to apply by brush, roller or serrated trowel; contact bonds in 10-15 minutes, full cure 48 hours

* Shelf life – 24 months unopened tin; mixed adhesive has pot life of 3-4 hours

* Coverage. using 2 coats 1 litre bonds 1 square metre

DOWNLOAD THE INSTRUCTION GUIDE HERE

* Primer- Solvent 2903 necessary as primer before applying adhesive for maximum bond

* Used by liferaft service stations and major manufacturers

Polymarine 2 part adhesives are recommended for larger and permanent repairs

* Solvent based polychloroprene rubber adhesive giving high strength bonds.

Available in one-component 70ml tube or two-component 250ml tin supplied with a 10ml bottle of A3695B Curative.

One-component particularly suitable for emergency repair of inflatable boats, RIBs and Dinghies.

Two-component particularly suitable for manufacture and repair of inflatable boats.

* Will bond natural rubber, polychloroprene, butyl, nitrile , hypalon and polyurethane rubber materials and leather.

Please note – not for use on plasticised PVC – use Polymarine 3026 PVC Adhesive

* Excellent resistance to heat, salt water and humidity

* Easy to use as a single part glue for quick and temporary repairs

* Easy to mix two part system supplied in sets with requisite amount of curing agent; can be used as a single part for quick temporary repairs

* Easy to apply by brush or roller…

* Contact bonds in 10-15 minutes, full cure 48 hours

* Shelf life – 24 months unopened tin, mixed adhesive has pot life of 3-4 hours

* Coverage – using 2 coats 1 litre bonds 1 square metre

* Use Polymarine 2903 PVC/HYPALON solvent – as a Primer and cleaner.

* As used by MOD, liferaft service stations and major manufacturers.

DOWNLOAD THE INSTRUCTION GUIDE HERE

Polymarine 2 part adhesives are recommended for larger and permanent repairs