Shock and vibration proof.

SUITABLE FOR:

Locks bolts, nuts, screws and tap bolts which should be able to be unscrewed later on. Seals screw threads and protects them from rusting.

NOT SUITABLE FOR:

Not suitable for applications with synthetics and wood.

Working conditions

Do not use at temperatures below +10 °C

Preliminary surface treatment

Parts to be locked must be dry and free of dust and oil. Degrease, e.g. with acetone. Remove any loose rust beforehand with a wire brush or similar.

Directions for use

Apply Metal Lock to screw thread and assemble. Metal Lock hereby also works as a lubricant. After assembly, do not move or shift parts.

Points of attention

Metal Lock is an anaerobic adhesive. This means that the product cures in combination with metal and in the absence of oxygen. Therefore, adhesive outside the joint will not cure, due to the presence of oxygen.

Stains/residue

Remove fresh stains immediately with acetone. Remove cured adhesive with a sharp knife.

Storage conditions

Store in a dry, cool and frost free place.